What's 14G light blue wire going to?

Heater blower.

Is J10 supposed to be a wire powering fuse box?

yes

J1 and b16is power instrument lights

B16 is the circuit that turns on the brake light when you crank the engine, to show the bulb is working. J1 looks to be power going in to the switch and then out to the heater. I need to think on that one for a bit.

J2 goes to fusible link so I imagine that's constant battery

Yes

 

Ok, so now can you help me match up the painless terminology to the Mopar?I tried understanding the ignition switch and looking at the B1 and B3 but couldn't really make sense of what wire went to where.

I'm not worried about the brake light during cranking.im trying to find the 5 main wires, the blower motor wire im going to wire in once i have the proper wires in the right spots

 

932 is Q1
931 &933 is J10
934 is J2
919 is J18

Ignore B16


Can you post a link to the full painless diagram? need to figure out the heater circuit.

 

I'm going to the garage in like a hour. I appreciate itttt

 

HMM

 

As far as the heater circuit, it looks like it sends power OUT.. that's easy to hook up.

 

So the ignition diagram is basically like the one I posted. Since this is a universal kit, it's not vehicle specific, but you can tell it favors gm and ford. Not much for mopar(ornocar). I did the turn signal connector with Deutsch connectors because it came with it's own pins. Looks nice!

 

Hey guys, I need yal help again. Turn signal wiring. Specifically the left and rights.

 

Hey guys, I need yal help again. Turn signal wiring. Specifically the left and rights.
View attachment 644934
View attachment 644933

to understand, you're needing to confirm which of the wires in the first pic goes to what? is that your question?

- Sam

 

Bumppp

 

Bump please, I need help with the wiring for the turn signal

 

Yes, it doesn't specify left or right

 

Bump