[Red76]

Doesn anyone know if they make a wheel that is 16" dia., in a 5 on 4.5 lug pattern?

 

[Evildriver-3]

Try some aftermarket companies

 

[trailduster440]

The 70's truck had 16x5.5 wheels with 5 on 4.5 small pattern optional from the factory. Not very wide at all. You could probably get some wide ones custom made

 

[william]

I would love to have a set of plain steel 16" 5 on 4.5" wheels. Keep us posted if you find any.
On the topic of wheels, how can I tell if my RC's wheels are the 15x8's? I know that sounds like a stupid question, but what points do you measure from? Mine are roughly 8" from bead to bead, and I believe they are original to my 75 RC. william

 

[lovemydodge]

try u.s. wheels.

 

[Chump]

Parts book for 74-77 shows a 16x5.00x4.5, 5 stud that used a 6.50-16-C Tire...try searching around at www.car-part.com there are some listed there for older RC's an 1/2 ton trucks. I thought this may be a size used on the Sno Commander/Fiter?

 

[Evildriver-3]

You measure from bead to bead on the rim that is where you find the width of the wheel where the bead makes it's seal, not the outer most lip that kinda bends but the flat part just below the lip

 

[william]

Thanks Ed-3!
william

 

[Bogie]

Here Willam
I use this link alot
www.rsracing.com/tech-wheel.html

 

[Red76]

FYI. US Whel makes a black wagon, whie and a chrome 16x7 and 16x8 in a 5 on 4.5 pattern.

 

[Adam4x4]

Doesn anyone know if they make a wheel that is 16" dia., in a 5 on 4.5 lug pattern?

www.car-part.com shows 16" steel and alloy wheels for 97-98 Dodge Caravan. some decent prices, too.

 

[Bogie]

You can also look into newer Jeep wheels as they still use 4x4.5 " pattern

 

[rampar410]

im running 16x10 on the 89, alum. 5 slot ,. got them @ american tire.. 5 on 5 1/2.. quinn