Dodge RamCharger Central banner
1 - 4 of 4 Posts

·
Registered
Joined
·
193 Posts
Discussion Starter · #1 ·
I'm wanting to get rid of all un needed electrical.
Has anyone gone from Auto to manual?
It seems like you would just need the new window regulator and handle?

Should I trace the power wires back to the source and cut it out of the circuit or just remove fuse?
Like I said I would like my rc, to be bare bones ALL unnecessary wiring to go.
 

·
Administrator
Joined
·
62,294 Posts
Yea it is that simple. The wires are generally intertwined with the power lock wires, which if you have, are long dead. To locate the wires, they run across the firewall, behind the heater box/ defroster vents. Then they drop down by the drivers right foot, and run over to the fuse block. Its a group of 4 wires, and has a connector right by the driver foot. You can just unplug it here, and leave what you cannot reach where it is. The power locks should have a big silver double sided relay to the right of the steering col.
 

·
Registered
Joined
·
13,500 Posts
can you buy the manual crank regulators ?  look into that . 99% of mine are manual .
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top