Dodge RamCharger Central banner
1 - 1 of 1 Posts

·
Registered
Joined
·
419 Posts
build your own sending unit, it is easy, find a float assemble and solder it to a peice of 5/16 fuel line use a diagram of the sending unit for your measuments, then find a piece of plate steel have a machine shop or welding shop cut the circle to the deminsions you need and then drill holes in for the attatching screws and for the 5/16 steel line, then solder the line inthe base plate, put a vent tube and overflow tube in and wala there you go, ohh yes and i would seal the top where the tubes protrude with a silicone bead, test it in the bath tub let dry and put it in.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top