Dodge RamCharger Central banner
1 - 4 of 4 Posts

·
Registered
Joined
·
10,220 Posts
Discussion Starter · #1 ·
Im gonna be swapping front ends in my RC with a 3/4 ton 44..the problem is..the 3/4 ton is full time 4X4..is it possible to sawp steering knuckles from a newer set up with lock in hubs??and if so would I have to have the axles too??
 

·
Registered
Joined
·
8,924 Posts
If you take and swap from the knuckles out of the D44 from a part time you can do that.
 

·
Registered
Joined
·
129 Posts
Is there something wrong with the 44 you have now? If not then you'd be wasting you're time with that swap. The only difference with the 3/4 ton 44 is from the knuckles out and it sounds like you'd replace that anyway.

Save some time and just swap in the components you need...Knuckles, brakes, hubs, and short shafts.
 

·
Registered
Joined
·
10,220 Posts
Discussion Starter · #4 ·
I see what your saying..thats a good idea..however..I am swapping the rear with a dana 60 and swapping the front would be easier than changing gears
 
1 - 4 of 4 Posts
Top