[mike_wiz]

OK I am doing creossover streering right now. I moved the gear box and was got my measuements by turning the wheel all the way to the right and then all the way to the left. I obviously had the key in the ignition for this in the on position.

I got the measurements and went to fill up the resivior and start the truck to get the fluid in and the air out. The key is stuck in the on position and will not budge. I checked the rod into the switch and it is fine,it is definetly locked up in the column. Anyone know how to fix this? Thanks

Mike

 

[Sledge]

Replace the key switch. Thats usualy the problem as far as my experiance goes Wyatt