Dodge RamCharger Central banner
1 - 7 of 7 Posts

·
Registered
Joined
·
29,688 Posts
the shifters are made by HURST / which was bought by Mr Gasket so go there and order a Universal shifter kit rebiuld / which comes witha ton of bushings and stuff / if you but the BIG Kit you new rods and all
 

·
Registered
Joined
·
3,515 Posts
Thats what makes the world go round-******* ingenuity.I mounted a piece of 1/2 or 5/8 thick teflon to the trans bracket and drilled a hole in it.i cant remember how long ago i did it,but its still like the day i put it in.it was about 2"wide and 4"long.i drilled a hole through the teflon and bracket then used a carriage bolt to hold it in place.i shoulda patented the idear cause it workeded soo well......
 

·
Moderator
Joined
·
5,141 Posts
had mine go out this weekend on the trail, used an old poly spring bushing from a CJ to rig it together for the rest of the trails. Shifts better now than it did before.

Got a ratchet shifter for it that should fix the problem permanently.
 
1 - 7 of 7 Posts
Top