Dodge RamCharger Central banner
1 - 3 of 3 Posts

·
Registered
Joined
·
773 Posts
Discussion Starter · #1 ·
not a real sexy tech topic,
but i just put in a bench seat up front.
looking at seat belt web sites i notice 3-4 different lengths.
i need the floor mounted reciever side for the 2 shoulder belts and an entire replacemnent non-retractable pair for the middle passenger.

60", 74" and 90" are the lengths.

any thoughts on the lengths?
does it really matter on the 2 shoulder belts?
thanks.
 

·
Registered
Joined
·
2,499 Posts
I don't see any problem with using the longest ones available.. They should have inertia-locking retractors (if they don't, don't buy them), and the stock ones are too short in my opinion, so anything extra is a plus. They should come as a matched set with the receiver sides, and some of them include the "stand up" sleeves for floor mounting..

Matt {peace}
 

·
Registered
Joined
·
773 Posts
Discussion Starter · #3 ·
well of course nothing is easy.

i was hoping to use only the reicever end of a part store universal replacement set and keep the stock shoulder harness.
nope, dodge metal plate interface is some funky design.

i dread removing that huge piece of trim again. i just replaced the harness with a JY one about 5 months ago. missed a screw and ripped the trim.

so off to the junkyard again and hopefully some belt recivers that fit.
not picky about color at this point.
 
1 - 3 of 3 Posts
Top