Dodge RamCharger Central banner
1 - 1 of 13 Posts

· Premium Member
1,497 Posts
Clean and inspect and regrease the slip yoke & splines on the driveshaft, wear there will cause a vibration. Check for snug fit, and smooth sliding, there should be very little rotational or side-to-side-flex play in the action.

If you take it completely apart, be certain to mark both parts FIRST, so you can put it back on the exact same orientation.
1 - 1 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.