Dodge RamCharger Central banner
1 - 20 of 38 Posts

·
Registered
Joined
·
1,102 Posts
irishpiper said:
Hi everybody,

I'm looking to purchase a Ramcharger (4x4) in the Edmonton area. Any leads...let me know.

Piper ;D
i saw an ad in safeway this morning , a 85 4x4 4 speed 318 for 1500 i think
 

·
Registered
Joined
·
62 Posts
What'cha will'n to spend? For the right price, I'll sell ya one of mine.

'82 RC
727 tranny
208 t-case
Manual hubs
Duel exaust
31's (fronts are worn and no spare)
High milage 318
Edelbrock 1406 (needs choke adjustment)
Ultra Pro Volt/Oil/Water gauges installed on a SS insert
(oil and water are mech. and are not hooked up right now)
AM/FM/Cassette from a '98 Neon
Center console w/ 4 cup holders
Aluminium jockey box bolted in rear for mess free trail storage
2" receiver
Wired for trailers (7 prong round)
New ECU, coil and plugs
Burns a little blue, but runs great.
Rust on the rear quarters
One hole in the floor behind drivers seat about 6 inches square
W2 a/c pump installed on motor ready for on board air adaptation

I'm running out of money on another project.

Make me a reasonable offer and I might consider delivery (I'm 6 hrs north of Edm).

Drop me a line: [email protected]
or
[email protected]

 

·
Registered
Joined
·
71 Posts
Spirit River, AB... hey a local, my rc is from spirit i drug it out of listages yard last year
 

·
Registered
Joined
·
71 Posts
my old man owns about 12 quarters right on the banks of the peace, so i spend most of my time out there. not to much around watino, mostly private land etc. your not the guy who bought my brother inlaws old rc, it was dark green with the sprayfoam job in the rust holes?
 

·
Registered
Joined
·
62 Posts
vazsek said:
my old man owns about 12 quarters right on the banks of the peace, so i spend most of my time out there. not to much around watino, mostly private land etc. your not the guy who bought my brother inlaws old rc, it was dark green with the sprayfoam job in the rust holes?
Must be, you described it pretty well. Its changed a bit though. I blew the motor 5 days after I bought the thing. I figure a weak bottom end, cause I was just on the highway when it started knocking. (thems the breaks). Added a few dodads here and there and I abuse it almost daily.

If it can survive me, it must be tough(lol)
 

·
Registered
Joined
·
20 Posts
Discussion Starter · #13 ·
fun2mud said:
What'cha will'n to spend? For the right price, I'll sell ya one of mine.

'82 RC
727 tranny
208 t-case
Manual hubs
Duel exaust
31's (fronts are worn and no spare)
High milage 318
Edelbrock 1406 (needs choke adjustment)
Ultra Pro Volt/Oil/Water gauges installed on a SS insert
(oil and water are mech. and are not hooked up right now)
AM/FM/Cassette from a '98 Neon
Center console w/ 4 cup holders
Aluminium jockey box bolted in rear for mess free trail storage
2" receiver
Wired for trailers (7 prong round)
New ECU, coil and plugs
Burns a little blue, but runs great.
Rust on the rear quarters
One hole in the floor behind drivers seat about 6 inches square
W2 a/c pump installed on motor ready for on board air adaptation

I'm running out of money on another project.

Make me a reasonable offer and I might consider delivery (I'm 6 hrs north of Edm).

Drop me a line: [email protected]
or
[email protected]
Thanks for the reply, unfortunately, I've had to take a break from this matter for a while, but now I'm back. My wife's from the Grande Prairie area and we occaionally go there to visit. Meeting up with you would be no problem if I was interested in your RC. Do you still have it? If so, send me or post pictures and we'll talk.

What about everybody else??? Any leads. I'd love to trade the car I havfe for a RC if interested. (1987 Cougar, excellent condition).

My email address is [email protected]

Piper
 

·
Registered
Joined
·
921 Posts
Went through Mannville the other day and there was a black 79 or 80 with the quad headlights at a wrecker there. Sorry, didn't get a name or number for the wrecker but might be worth a drive.
 

·
Registered
Joined
·
20 Posts
Discussion Starter · #15 ·
Manville's a little too far out for me, and I'm afraid if it's at a wrecker, it's probably too much of a project (may it R.I.P.).

I appreciate the lead though, let me know if anyhting else comes along. ;D

Piper
 

·
Registered
Joined
·
220 Posts
i got another lead for yea...it's a 79 r/c 5'' susp 3 in body...was running 35's(although know it needs rims and tires)360 interceptor...2 brand new racing seats 4 point harnesses......he wants $2500....i think it's obo....still has factory diffs,rebuilt 203....anyhow msg me for more if this one perks your interest
 

·
Registered
Joined
·
20 Posts
Discussion Starter · #20 ·
Bumpin to the top...

Still lookin for a decent full size 4x4 for $1500 to $3000 in the Edmonton area. I would travel 2 to 3 hours for the right unit at the right price.

Piper
 
1 - 20 of 38 Posts
Top