Dodge RamCharger Central banner
9021 - 9040 of 9060 Posts

·
Premium Member
Joined
·
247 Posts
First thing my eyes were drawn (Chuck's truck on trailer) to were those selectable locking hubs protruding through.
It’s an ‘88 W100 with some ‘92 w250 cummins axles! Those are the wheels and tires that came on the 250 before I parted it out. I have some 17x9s with 34x10.5 Toyo ATIII for it, should be about flush with the hubs.
Tire Wheel Automotive tire Tread Synthetic rubber
 

·
Administrator
Joined
·
31,525 Posts
Two oddball welders.

Wheel Tire Vehicle Sky Motor vehicle


Motor vehicle Gas Wood Automotive exterior Machine



Vehicle Wheel Motor vehicle Automotive tire Automotive design


Wheel Tire Automotive tire Motor vehicle Vehicle


Wheel Tire Vehicle Automotive tire Motor vehicle
 

·
Administrator
Joined
·
31,525 Posts
Not quite a welder, but a 24 volt 600 amp generator for starting aircraft.

Wheel Tire Vehicle Motor vehicle Automotive tire



I figured it still deserved a place here, its heart is a Mopar 265 flathead.

Motor vehicle Wood Automotive exterior Vehicle Gas


Motor vehicle Gas Auto part Metal Vehicle
 

·
Super Moderator
'79 Macho 360 Magnum, Comp 480 cam, Hughes springs, 650 Thunder AVS, Pertronix Flamethrower ignition
Joined
·
7,478 Posts
^^^ I used to have that exact same tire machine, I wish I kept it.
Saw a nice 1st gen Bronco at my buddy's shop the other day. 👍
 

Attachments

  • Like
Reactions: Panda

·
Super Moderator
'79 Macho 360 Magnum, Comp 480 cam, Hughes springs, 650 Thunder AVS, Pertronix Flamethrower ignition
Joined
·
7,478 Posts
This was sitting on the floor inside the shop also.....😎
 

Attachments

·
Registered
Joined
·
8,567 Posts
^^^ I used to have that exact same tire machine, I wish I kept it.
Saw a nice 1st gen Bronco at my buddy's shop the other day. 👍
It's a stocker!
You rarely see those without the rear wheel wells cutout.
 

·
Registered
Joined
·
8,567 Posts
This was sitting on the floor inside the shop also.....😎
Did you post that a while back?
That isn't a stock block there is it?
Looks almost like something out of an old top fuel. Aluminum with lots of rib bracing. With a "standard", street dual 4 barrel intake.
 

·
Registered
Joined
·
8,567 Posts
We totally finished the back yard today. What a major pain. The project started last August. And with all the stupid delays because of material shortages... it's finally done...

Plant Sky Grass Tree Chair


Plant Building Flowerpot Road surface Botany
 

·
Administrator
Joined
·
31,525 Posts
Wheel Tire Automotive parking light Vehicle Sky
 

·
Super Moderator
'79 Macho 360 Magnum, Comp 480 cam, Hughes springs, 650 Thunder AVS, Pertronix Flamethrower ignition
Joined
·
7,478 Posts
Wow, your yard looks great! 👍
Yes, I posted that Hemi before. It still sits there, lol.
It's a Ray Barton Hemi I believe but not sure, I'll have to ask next time I'm around there. I love that intake.
 
  • Like
Reactions: KurtfromLaQuinta

·
Super Moderator
'79 Macho 360 Magnum, Comp 480 cam, Hughes springs, 650 Thunder AVS, Pertronix Flamethrower ignition
Joined
·
7,478 Posts
^^^ I used to have that exact same tire machine, I wish I kept it.
Saw a nice 1st gen Bronco at my buddy's shop the other day. 👍
The wheel wells werent cut but those rims are 17" I noticed 👍
 

·
Super Moderator
'79 Macho 360 Magnum, Comp 480 cam, Hughes springs, 650 Thunder AVS, Pertronix Flamethrower ignition
Joined
·
7,478 Posts

·
Administrator
Joined
·
31,525 Posts
I have no idea.

I do know it did not use this mopar engine.

Art Gas Machine Urban design Engineering
 
  • Wow
Reactions: RCCADMAN

·
Administrator
Joined
·
31,525 Posts

·
Super Moderator
'79 Macho 360 Magnum, Comp 480 cam, Hughes springs, 650 Thunder AVS, Pertronix Flamethrower ignition
Joined
·
7,478 Posts
  • Like
Reactions: KurtfromLaQuinta
9021 - 9040 of 9060 Posts
Top