Dodge RamCharger Central banner

Power Door Lock Question

1331 Views 4 Replies 4 Participants Last post by  blueraven
My 88 Ramcharger has power door locks. The switch does not activate them or even make a sound when you push it. I tried to lock it by pushing the lock down with my hand and it will not move. I tried locking it with the key from the outside and still nothing. Does anyone have any experience with this problem? I have never worked on power door locks so I am not sure where to start or what the problem may be. Is the switch bad? Is there a problem with the linkage? Thanks in advance.
1 - 1 of 5 Posts
If you cant move it with the key or button it must be mechanical - stuck linkage. Take off the door panel and oil the linkage. Make sure the solenoid is not stuck by removing its link and trying button and key.
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top