Dodge RamCharger Central banner
1 - 5 of 5 Posts

·
Registered
Joined
·
1,390 Posts
Discussion Starter · #1 ·
;DHi guys, waz up
I'm going to be swapping out my old junky auto for a standard unit, and was toying with the idea of having a NV4500 5 spd :eek: put it instead of the usual 4 spd.But I don't know what it would take, so if you guys could give me some insight, I;d be grateful. Thanks :D
 

·
Registered
Joined
·
1,640 Posts
it can be done, good luck finding the tranny for a decent price though. I think the early 90's 3/4 ton and 1ton trucks had them...finding a complete truck with all the parts would be a good starting point.
 

·
Registered
Joined
·
7,749 Posts
what engine is it mounting to.
from what I've gathered, all the parts are readily available to mount up to the small blocks, but big blocks get tricky. I think there are a couple people on here still trying to plan out a clutch assembly and bellhousing that will work.
 

·
Premium Member
Joined
·
9,424 Posts
You need: all the clutch pedal, linkage, pivots and levers; a bellhousing (the 5 speed will bolt to the same bellhousing as the 4 speed) throw-out arm and bearing; flywheel, clutch and pressure plate; and a hole in the floor for the shifter.
 
1 - 5 of 5 Posts
Top