Dodge RamCharger Central banner
1 - 6 of 6 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter · #1 ·
As i stated before this whole 4x4 thing is completely new to me. After putting about 200 miles on the rc both u-joints in the front started rattlin. As i attempted to replace them neither of the front hubs will break loose, does anyone know a handy little trick to knocking 20 years worth of dirt and rust loose from these dang things
 

·
Premium Member
Joined
·
886 Posts
what year is yer truck?
 

·
Premium Member
Joined
·
7,231 Posts
In the land of 4x4s PB Blaster and WD40 are your friends. Always keep them handy. Try to avoid using heat as this can weaken metal parts.

Ed
 

·
Premium Member
Joined
·
9,424 Posts
For that matter, you can use one of the reverse cut screw remover drill bits, which will either drill off the head, or bite and remove the screw while you're drilling. But, as above, soak everything with PB Blaster first.
 
1 - 6 of 6 Posts
Top