[BIGWAHINI]

O.K., heres the deal. I have never replaced an entire braking system before. Have now, now having trouble getting pressure in the master cylinder to bleed the system. Bled the master, installed the lines, now I just don't know how long it should take to get fluid to the right rear wheel. Even when all bleeder screws are closed it still gets no pressure. What am I doing wrong?

 

[awyseguy]

I haven't done it myself.. But I'd say it may take a bit of work to bleed the neew lines.. Be sure to keep the master cylinder full or you'll end up with more air in as you go.

 

[JackedRamcharger]

when you replaced the brakes did you also replace the calipers??if so take them off and using a piece of WOOD pry the pistons untill they move and mve them in and out a few times

 

[78machowgn4me]

there is a part that mounts on the driver frame rail that distibutes brake fluid to all the brakes, you may need to replace that or clean it out.