[DODGEBOYS]

STOMP with both feet on the brake pedal as hard as you can till the light go's out / then gingerly bleed the brakes till the pedal comes up and your done [ you need to recenter the combi valve/proportioning valve ] other wise the brakes will never work

Note / you DO NOT need to replace anything

 

[DODGEBOYS]

to get the rear brakes working you hafta "recenter" the valve , and you can't remove it without installing another one [ you already have one ] and don't get me wrong sometimes it can be very frustrating to get the valve to kick , even after pumping several qts of brake fluid thru the system , but like l said above JAB the brake pedal HARD as many times as it takes to center the valve [ you,ll know when it centers as the pedal will drop to the floor ] once centered very easy [ light pedal pressure ] bleed the rear brakes till the pedal comes back up and your done

 

[DODGEBOYS]

SO I assume you don't want to try this while driving huh?

probly not

 

[DODGEBOYS]

IF the valve is centered then you would have Equal pressure front and rear when you bleed it and the pedal would be perfect

 

[DODGEBOYS]

your dash light might not work , push down the the E-brake pedal the light WILL come on if it works

 

[DODGEBOYS]

so you have NO clue as to weather the light works , but just the fact that you cant get the rear brakes to bleed says the valve is kicked