Dodge RamCharger Central banner

Need Electrial help.!!!!!!!!!!

1785 Views 11 Replies 10 Participants Last post by  77ramcharger
Well I was setting in the driveway with the RC running and the rasdo on. all of a sudden the RC dies. I crank it over and it fires but as soon as i let go of the key it dies. do it again same thing. do it a 3rd time and all it does is crank over wont fire. I have changed out the ing control module, balast resistor ,coil and the whole roter. it still wont fire. I dont have any spark. I jumped from the battery over to the the + side of the coil and it still wont fire. I am out of options here people. This is my daily driver. any thoughts would be greatfull. Thanks

Nathan.
1 - 1 of 12 Posts
I've had my wires fry down towards the bottom of my steering column. The problem spot was the connector coming out of the firewall linking into the IG switch.
If I remember correctly, my IG switch went out soon after I had fixed the wires. It's a inexpensive and easy fix. I have changed mine twice now since the aftermarket replacements have weak springs.
It could be possible the contacts within the IG switch are worn out in the run position.

IM me if ya need some details.
1 - 1 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top