[swwaltw]

hello this is my 1990 dodge ram

 

[swwaltw]

well here is my truck site with all my info even completly lowered http://members.cardomain.com/swwaltw

 

[swwaltw]

thanks for all the complments i have a wire ran up my window seal i still get all the channels that i allways did but i listen to cd any way

 

[swwaltw]

i did not spend a dime not even a penny i just took the antena out cust the wire striped back some shielding and soldered a 2' pece of 18 gage wire to it and ran it behind the rubber molding that holds the windshield in if you try this you will see that there is enough room to a new antena up there so that is what i did

 

[swwaltw]

i had to update my page what do you think

 

[swwaltw]

I was hoping that you can help me, on the lower control arm do you also have to get a new springs, or do you have to just put it on and it is lowered, or what else do you have to do.

lower control arms only means that the spring pocket is lower you keep the same springs all is good if this spindle thing goes well the that would be the best way to go

 

[swwaltw]

the control arms are ok but i did have to reem out the bushings to get the bolts through it ride ok but needs sway bars and the upper spring cup needs cut down to stop it from bottoming out so much the springs are orginal no changes and when i had it aligned they didnt have any problems i am waiting to see how the dakota spindles work

 

[swwaltw]

redid my site again put everything on one page what do you think

 

[swwaltw]

This is my daily driver. The only transpiration I have, so in the cold months I don't get much done. This summer I plan on shaving my cargo light, filling in that seam thing on the back of the cab, shaving off my rain gutter, filling my steak pockets and finishing my interior.

 

[swwaltw]

check out my new page with more info.
http://members.cardomain.com/swwaltw

 

[swwaltw]

http://members.cardomain.com/swwaltw
look

 

[swwaltw]

For sale

[email protected]