[jpryorx2]

will the intake from a 95 efi 318 fit on a 84 318 or will i need to swap heads too?i'v been reading alot about the megasquirt injection system for my sand rail now i'm thinking about putting it on the truck too but useign this intake would be alot cleaner that fabbing up my own intake heres the style i'd want to use.i'm hopping to do this swap somtime this summer becasue i'm sick of my damn carb.so far everyone i'v talked to has had no problems with useing this ecm
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=36474&item=2474352279&rd=1

thanks
jason

 

[RAMMAN4]

Nope, it won't be a direct bolt up. The LA manifolds have the manifold bolts going into the heads at and angle and the magnum intakes have the bolts going straight down. I'm not sure about swapping heads though. Someone else might know if they interchange.

 

[Guest]

To use a magnum intake you also have to use the heads. The intakes won't swap unless you do.

Chris

 

[Guest]

Look at it this way. So you have to use the Magnum heads too, but you get heads that have a better flow balance than the 340 X heads, and that's better performance for you right from the start.

 

[jpryorx2]

ok i can't do anything till i get a job anyways so i'll have to see what the whole deal is gonna cost me swaping heads too.probelly be cheaper for me to have an intake modded for the injectors.but i'll see how making the intake works on the sandrail first before i decide what i'm gonna do thanks for the info guys
jason