Dodge RamCharger Central banner

how big

1511 Views 7 Replies 4 Participants Last post by  Evildriver-3
what are all the engines you could drop into a stock 318 rc
1 - 8 of 8 Posts
G
If you are talking about what will fit. - just about anything you can imagine. any chrysler product.
If you mean what will bolt up to your current transmission. - Any small block 273-360.
Get very specific in your question, you will see if you do it will get you the answer you are looking for
G
a 359 HO 24 valve cummins turbo diesel!
Get a MP Megablock bored to 4.500" and a 4.500" stroker crank. You will then have a 572 cu.in.engine. Is that big enough? Put a 4.625" stroker crank in it and that will get you about 604 cu.in. That should be big enough and will bolt right in using RB motor mounts and oil pan.
604 ci{bigeyes} Thats a good point to start if you have thousands of dollars to blow :p
G
Oh make it easy, just drop in a HEMI crate motor. they only cost about $11,000
Dodge 85 RC said:
604 ci{bigeyes} Thats a good point to start if you have thousands of dollars to blow :p
Actually the indy maxx alum block or the keith black alum block and get 640 cid forget that cast extra weight stuff
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top