Howdy,
On both the positive and negative posts of my 76 RC battery, along with the usual battery cables and clamps are two other smaller (12 gauge) wires. The one going to the positive post has a fusible link on it and goes into the harness. The one at the negative terminal does not appear to be a fusible link, is about 7 inches long, and is attached by a screw to the chassis.
Should the 12g wire from the neg post to the chassis be a fusible link also?
On the negitive side it is just the body ground the positive side shuld be the fusable link from the charging system (keep this im mind if you swap to a larger alt. it will be to small)
This is an older thread, you may not receive a response, and could
be reviving an old thread. Please consider creating a new thread.
Dodge RamCharger Central
RamchargerCentral.Com is a Dodge truck community built by a vast number of experienced owners. Whatever you're thinking about doing from routine maintenance to full-on restoration, odds are somebody around here already has. Originally focused on the Ram Charger / Trail Duster, our members own, drive and wrench on Mopars from the 40s to the current day. It's not what you buy, it's what you build.