Dodge Ram Cummins Diesels and Mopar banner

81 - 100 of 103 Posts

Registered
Joined
1,578 Posts
Sweet馃憤
 

Registered
Joined
147 Posts
Discussion Starter · #82 ·
Doing mock up on the gas tank today, moved a crossmember to the back of the frame. There's plenty of clearance to access the rear upper shock bolts. I'm going to make a make a support out of square tubing to hold the tank in place.
Rob
 

Attachments

Registered
Joined
1,578 Posts
Nice ,that tank looks big back there. If u use a flap disk or a grinding wheel. You wont even touch the frame. Down to a thin layer of the rivet. Then punch and hammer, makes nice nice馃榿
 

Registered
Joined
147 Posts
Discussion Starter · #84 ·
I'm going to body fill my gouges. I should have used the flap disc, the rivets did pop right out thank goodness!
Rob
 

Registered
Joined
147 Posts
Discussion Starter · #85 ·
As the title says here's my 93 D150. I'm doing the body work on the cab then I'm pulling the cab to put on a dolly so I can clean/detail the underside of the cab. I have been working on the truck as I have had time for about a year now. I'm going to do a resto mod build. The plan is to put a stroker kit in the 318 magnum to make it a 390. Lower the the truck 2/4. Viper red paint and tan/brown custom interior.
Thanks,
Rob
 

Registered
Joined
3,418 Posts
Looking great!
 
  • Like
Reactions: Moparbob1987

Registered
Joined
388 Posts
Looks great man! Good work.
 
  • Like
Reactions: Moparbob1987

Registered
Joined
388 Posts
Man them are looking sweet. So adding some red into the paint mix too?

Neil
 
  • Like
Reactions: Moparbob1987
81 - 100 of 103 Posts
Top