Dodge RamCharger Central banner
1 - 10 of 10 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
Do any of you out there know what other options for transimission are out there that would work on a 360 or 440 engine. I want to know what transmission are available that are either a 4 spd or a 5 spd (overdrive) Thanks for the help, any and all details you can reply with would be appreciated.
 

·
Moderator
Joined
·
5,684 Posts
Np 435 or the NV4500, but this would be better if posted in the Vechile help board you might get more responses. By the way welcome to the site. Good to have you aboard
 

·
Premium Member
Joined
·
8,689 Posts
whats wrong with your auto tranny? what kinda driving will you be doing with the truck?
 

·
Premium Member
Joined
·
12,766 Posts
strictly manual or maybe an automatic?

new or old transmission?

how bout the new 6 spd there putting in the 05's
 

·
Registered
Joined
·
5,581 Posts
well, with enough money, any transmission can be bolted up behind any motor. as far as a 440, the 727 is it without some type of adapter plate. the two best options for the 360 are the 727 and the a518 from 90+ trucks.

Duane
 

·
Premium Member
Joined
·
8,998 Posts
Thye do make an adapter to put an a518 behind a BB, but ya better have it beefed up well.
 

·
Registered
Joined
·
5,581 Posts
yeah, you can get the adapter plate and put a618 internals into the a518 and bolt that to a 440.

Duane
 

·
Registered
Joined
·
72 Posts
If you are going to run a bb i would sugest keeping the 727 and adding an overdrive unit to it. The 727 is a no-lockup type converter and is less likelly to fail. However w/o lock-up highway millage is sacraficed. If you are going to run a 360 Hughes offers a nice A518/46RE with all the goodies for around 1800, however switching to the A518 you would need a new converter.
 

·
Registered
Joined
·
5,581 Posts
most 4x4 a518s from 90-93 are also non lockup.

Duane
 
1 - 10 of 10 Posts
Top