Dodge RamCharger Central banner
1 - 6 of 6 Posts

·
Premium Member
Joined
·
7,292 Posts
The cab structures are identical, so it's safe to say, yes it can be done, however the gauges may not be interchangable and the wiring harnesses may not interchange either. You can probably solve those with aftermarket gauges and custom wiring or modifing the 82's wiring.

Ed
 

·
Registered
Joined
·
4,049 Posts
Another possibility... I'm gonna put a 85 dash into my 88. In order to solve wiring issues, i'm goint to put the 85 harness into the 88 wile I have the dash out..

One question though... Do the 75 & 82 all bolt up into the same bolt holes??
 

·
Premium Member
Joined
·
7,292 Posts
I don't know if Dodge continued to have the bolt holes located in the same places when they did the redesigned dash in 81. It shouldn't be too hard to drill new holes and bolt the dash in.

Ed
 

·
Registered
Joined
·
752 Posts
I would look very closely before doing this. I think the heater boxes are different and the heater hoses may enter the cab in a different spot. Something to consider.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top