Dodge Ram Cummins Diesels and Mopar banner

1 - 5 of 5 Posts

·
Registered
Joined
·
897 Posts
Discussion Starter · #1 ·
Hi all, while driving home at 65 mph, my cruise control disengaged. I turned it off and back on, reset it at 65, it held for 10 seconds then disengaged again - this continued all the way home. Anyone run into this problem?

Trouble shooting: I was going to check the switch on the brake pedal, then make sure the wires are not loose on the unit, then check the vacum hoses. That is about all my esperience with this thing.

Any suggestions?

Thank you
 

·
Registered
Joined
·
248 Posts
well your luckey yours even turns on mine dont even turn on lol ;D
 

·
Registered
Joined
·
2,508 Posts
I don't think there is a switch on the brake pedal...I'm pretty sure the CC disengages when you hit the brake and the valve hooked up to Brake Booster opens up the vacuum and shuts it down......the valve I'm talking about will have two hoses ...one going to the manifold and one going to the cruise control module

mike
 

·
Registered
Joined
·
897 Posts
Discussion Starter · #4 ·
Thank you very much. I will check on that vacum hose.
 

·
Registered
Joined
·
248 Posts
if there is a line goin to the manifolds will that elimnate the cc if you put headers on?
 
1 - 5 of 5 Posts
Top