[Monsta® aka Mudshark]

Found a Mopar Big Block but I can't seem to nail down which engine it is. Here is the casting number #2463209.

Maybe someone here and answer this before I go to work and find the answer.

 

[IntenseImages]

why look at a casting number, why not look at the side of the block under the exhaust and see what is cast there, it should tell you the engine size.

eric

 

[IntenseImages]

uh after further deliberation, mudshark i just have one question for oyu.

was that a head casting number, and if so, where is this engine?

here is what i found

2463209 426* '63 *Max Wedge


eric

 

[Monsta® aka Mudshark]

Well, the good news is. I found a wedge motor of my dreams. And thank you for breaking my heart. I'd sell my wife for this engine.

It's getting ready to go to the crusher. The block has three holes in it. Probably bullet holes.

The block ID numbers weren't readable.

 

[IntenseImages]

Well, the good news is. I found a wedge motor of my dreams. And thank you for breaking my heart. I'd sell my wife for this engine.

It's getting ready to go to the crusher. The block has three holes in it. Probably bullet holes.

The block ID numbers weren't readable.

damn dude, i would sell your wife to own that engine to, sucks it is no good. :\'( :\'( :\'(

is there any way to save the heads and stuff off of it?

eric

 

[Monsta® aka Mudshark]

No heads, stripped block. If anything was still on the engine, I'd of stripped it.

 

[chrysler300le]

The casting number you gave is for the Max Wedge heads, but you said there are no heads and that its for the block. I couldn't find any block casting numbers that match that. I do know that the max wedge blocks isn't the same casting number. So don't lose any sleep. It was probably some worthless 361 or 413 industrial engines.

 

[Bummo]

You should be able to get a date off that block. Check the bore with a caliper.