[Taz_man440]

O.k. i have an 82 r/c small pattern. Just got the 85 r/c big pattern. Want to put the rims off the 85 on my 82.. on rearends can u just swap the axels ?? or do I have to swap the complete rearends? on the front, can u just swap the roters?? I want to make the 82 big pattern & 85 into a small pattern....

 

[ChargingRam]

The 82 should be big bolt pattern. My 81and 85 both have big bolt pattern.

Brian

 

[Sparky McShakerton]

i think he's talking about 2wd. the 2wds didnt have the big bolt pattern until 85 i believe

 

[Guest]

If this is a 9 1/4 rear, keep in mind Dodge went to a larger c-clip in April 84. You can just swap out the axle shafts but make sure you use the large c-clips with the axle shafts from the 85.

 

[Taz_man440]

Thanks PrimerGrey.. what about the front roters?? will they interchange?

 

[chrysler300le]

Thanks PrimerGrey.. what about the front roters?? will they interchange?

Yes rotors are interchangable.

 

[Taz_man440]

Thanks PrimerGrey.. what about the front roters?? will they interchange?

Yes rotors are interchangable.

Thanks Guys Y'all the best!!