Dodge RamCharger Central banner
1 - 20 of 34 Posts

·
Registered
Joined
·
8,924 Posts
Discussion Starter · #1 ·
What is the best penitrating fluid that is out there? I've used Bust it and that works pretty good, and also wd 40, but what other ones are good too?
 

·
Premium Member
Joined
·
4,879 Posts
1) Aircraft penetrating oil---do not recall the brand (roommate is an A&P mechanic)
2) PB Blaster
3) Liquid Wrench
All of the above make WD-40 look like water (WD-40 is not a penetrating lube BTW) Never tried Bust-it. May try it out.

-SM
 

·
Premium Member
Joined
·
12,766 Posts
PB Blaster.

WD40=water discplacement 40th time. (took em 40 times to figure out kerosene displaces water ;D )

 

·
Premium Member
Joined
·
10,862 Posts
PB Blaster, hands down! Best stuff I have ever used
 

·
Premium Member
Joined
·
10,351 Posts
I'm a fan of PB Blaster too.
 

·
Registered
Joined
·
1,183 Posts
I think the aircraft oil is Kroil.

Slanted_Mind said:
1) Aircraft penetrating oil---do not recall the brand (roommate is an A&P mechanic)
2) PB Blaster
3) Liquid Wrench
All of the above make WD-40 look like water (WD-40 is not a penetrating lube BTW) Never tried Bust-it. May try it out.

-SM
 

·
Registered
Joined
·
8,924 Posts
Discussion Starter · #9 ·
Thanks, I think I'll try the PB blaster. Does autozone or napa carry either of those?
 

·
Registered
Joined
·
89 Posts
PB Blaster is the best stuff that i have found.. i found it at A.Z. it was $3-$4 a can if i remember correctly. it was worth every penny.
 

·
Registered
Joined
·
813 Posts
Kroil is the best I've tried, but I had to order it from the manufacturer. PB Blaster is the best that I have tried that is commonly available. WD-40 is good for some things, but not as a penetrating oil.
 

·
Registered
Joined
·
8,924 Posts
Discussion Starter · #12 ·
Thanks again guys, I went out and bought a couple of cans of the pb blaster from the zone, hopefully its as good as you guys say it is because it wasn't cheap.
 

·
Registered
Joined
·
813 Posts
If you think PB Blaster is expensive, then you won't like the price on the Kroil.
 

·
Registered
Joined
·
8,924 Posts
Discussion Starter · #15 ·
$6 a can{bigeyes} I guess $4 a can aint that bad anymore. It just seems high to me because I've never actually bought anything like that before. Closest thing would be brake cleaner and thats cheap.
 

·
Premium Member
Joined
·
1,906 Posts
I've heard PB Blaster is good, but I KNOW Kroil is freekin GREAT!! Good gun cleaner too. I think they have a website you can order from. Kranolabs.com?
 

·
Premium Member
Joined
·
9,993 Posts
Just make sure you give it plenty of time to work its way in. Spray the bolt every hour for about three or four hours, then let it sit overnight. Next morning they come out like butter ;D
 

·
Registered
Joined
·
8,924 Posts
Discussion Starter · #18 ·
I plan on doing that, the truck is out of town, just a little bit south of my fiancee's, so when I'm on my way up to my fiancees tonight after work I"m going to stop and just soak it with that stuff and let it sit overnight. Then I'll come back tomorrow and start beating on it.
 

·
Registered
Joined
·
813 Posts
Kroil's website is KanoLabs.com
 

·
Premium Member
Joined
·
12,766 Posts
boba said:
I've heard PB Blaster is good, but I KNOW Kroil is freekin GREAT!! Good gun cleaner too. I think they have a website you can order from. Kranolabs.com?
really..... im always nervous to use auto stuff on guns for fear of the bluing or polymer frames. or even worse some stuff just wont wipe out (like how diesel bleeds out for weeks after you used it) an flash points of residue..... told you im paranoid

BTW another rooting for PB Blaster. it snowed here an froze up so my wife coundt get in her truck (ice in the lock??) coundt find the WD40 so i shot in some PB. lock works good. nuff said
 
1 - 20 of 34 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top