The tach in my TD is mounted to the left of the steering column and I hate it. As soon as I get an autometer tach, it's going onto the pillar or on top of the dash...After a roll cage goes in, it will be mounted to that. 
Auto Meter Gauge Pod
Apparently auto meter decided to realize dodge made trucks before 1994 and started making piliar pods but didnt tell anyone. PN.#15198 is for a dual pod unit they also make a single unit .They are desined to hold any 2 1/16 " gauge the hardest part will be routing the wires/hoses ,depending weither you use electric or mechanical.Mine required slight trimming on the back side to match my trim ,the included hardware to mount it I didnt care for and decided to use 3m adhesive fome tape instead.I got mine from summit (they had it in stock) price was 24.95 ckeck autometer for applacation
www.autometer.com
go to gauge works on page 25 for list,and they only come in black you will need to dye it to match your interior
www.autometer.com
go to gauge works on page 25 for list,and they only come in black you will need to dye it to match your interior
1 - 1 of 12 Posts
1 - 1 of 12 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Dodge RamCharger Central
RamchargerCentral.Com is a Dodge truck community built by a vast number of experienced owners. Whatever you're thinking about doing from routine maintenance to full-on restoration, odds are somebody around here already has. Originally focused on the Ram Charger / Trail Duster, our members own, drive and wrench on Mopars from the 40s to the current day. It's not what you buy, it's what you build.
Full Forum Listing
Top Contributors this Month
View All
Canadian country boy
346 Replies
RCCADMAN
129 Replies
DODGEBOYS
89 Replies
