Dodge RamCharger Central banner
1 - 10 of 10 Posts

· Registered
Joined
·
137 Posts
Discussion Starter · #1 ·
Hey does anyone know where i can get the tubing from the air pump to the manifold. Mine is rusted out! Dodges are scarce in the JYs around here and even if i did find it i figure it would be a bitch to get off.

Thanks
Rod
 

· Premium Member
Joined
·
7,425 Posts
I can't remember if the check valve is part of the tubing or is a separate piece. AC Delco has a p/n for a check valve here. Once you enter your vehicle info, choose the emissions from the drop down menu, then air check valve.

I ordered an AC Delco check valve for my old 81 Regal, and it was the complete assembly, tube to manifold and all. Might be worth giving them a call.

Oh yea, I ordered it through NAPA. I got the part # from the AC Delco website.
 

· Registered
Joined
·
137 Posts
Discussion Starter · #3 ·
Thanks Bro i will give you an update as to my success!!

Rod
 

· Premium Member
Joined
·
7,425 Posts
i1lusion said:
The check valve is a part of the tubing so that should come as a whole assembly.
Thanks man, that part of my 84 is long dead and buried. I've never even looked at the setup on my 90.

Good luck Ramrod
 

· Moderator
Joined
·
5,422 Posts
My parts book says it's Dodge part number 4086676. you might ry giving the dealer a call and see if the number is still good or has changed. If it's still good, you can get the part cheaper on the web. There are some other options...let us know what you find out.
 

· Registered
Joined
·
137 Posts
Discussion Starter · #7 ·
I went to Napa and all they handed me was the check valve no tubing. I will call the STEALER oops i mean dealer tomorrow! Thanks Chump!!

Rod
 
G

·
That part is still available from the dealer. I looked into it for my 85. It is the tube and check valve assy. and it is pricey up here, $150.00.
Needless to say I worked around it.
 

· Moderator
Joined
·
5,422 Posts
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top