[TNTBigRamcharger]

I found a good deal ($200)on a 94 318 in the truck with all the parts minus the auto trans . How hard is it to put it in my 79 rc and keep the 4 speed . I want the fuel injection.

 

[RAMMAN4]

Good luck! It would be pretty easy to convert it to run on carb, but to keep the multiport fuel injection would be some work.

 

[GunPilot]

Stay tuned to the Megasquirt thread...

 

[s ǝoɾ]

you would also need a flywheel and im not sure but i think you need a crank designed for manual tranny or get your crank drilled. some body will confirm. yes, stay tuned to mega squirt thread.

 

[B1llyw]

you would also need a flywheel and im not sure but i think you need a crank designed for manual tranny or get your crank drilled. some body will confirm. yes, stay tuned to mega squirt thread.

It would be some work. You need a '92-'99 Dakota 318 flywheel or '92-'01 Ram 318 flywheel. The crank should alread be drilled for the pilot bearing. If you can find a '92 or '93 Magnum truck and steal the dash and wiring you'll be in shape.

 

[TNTBigRamcharger]

Thanks for all the info its more work then i want to do right now!

Thanks Todd

 

[chrysler300le]

much easier if you just wanted to go carb

 

[TNTBigRamcharger]

I want fuel injection I am tired of my carb!! And i am not spending another $400 + on a nother new one. I am going to try a tbi set up off a 92.

 

[chrysler300le]

92 318's are magnum engines with mpi

 

[TNTBigRamcharger]

1988-92 are tbi some 92are mpi and all 93 are mpi . the ( i think) late 90- 92 are the better tbi the earlyer tbi had a problem with vapor lock.