Dodge RamCharger Central banner
1 - 4 of 4 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
Hello guy I recently start rebuilding this 77 ramcharger and im at the point where I put the cab on the frame but the cab is a 87 and the frame a 77 I heard some cab mount are different people told me that I need a 3inch body lift I wonder wich one I should get do you guy have recommendation

Here a pick of my rig thanks guy !
Tire Wheel Automotive parking light Motor vehicle Vehicle
 

·
Registered
Joined
·
4 Posts
Discussion Starter · #9 ·
Check your bolts, right around 87 to 89 they went metric. I just bought longer grade 8 bolts. The very front ones I think will be shorter then the next two. then of course the third row can use the factory bolt. Above the rear wheels, needs a stud. And the last ones are welded into the body, I ground them out and used grade 5 stove bolts. You only need 8 blocks. You will need to make/modify the bumper brackets, when you get that far.
Alright thanks you !!
 
1 - 4 of 4 Posts
Top