Dodge RamCharger Central banner
1 - 5 of 5 Posts

·
Registered
Joined
·
3,524 Posts
Discussion Starter · #1 ·
wanting to make sure on what all is needed to swap a 203 inplace of my 208 on my 727, i just need the output shaft and the berrign that originally wne tinto the 203 from the old trans it was on right?
 

·
Registered
Joined
·
8,924 Posts
You need the tailshaft from a 727 that had a 203 and the adapter for a 203. Thats all you need. You might need a new crossmember too, not sure.
 

·
Registered
Joined
·
5,581 Posts
u might also need new driveshafts, and the drive flanges from a cad axle would be a good option instead of leaving ur hubs locked all the time.

Duane
 

·
Registered
Joined
·
3,524 Posts
Discussion Starter · #4 ·
this truck wont ever leave lo loc
and what is the adapter? i have the tail shaft, but im not sure as to what the adapter is.
 

·
Premium Member
Joined
·
17,219 Posts
the adapter is the part that bolts to the back of the tranny that the tail shaft goes through, if oyu dont have one for a 203 i have one. maybe we could work out a trade

and you will need different driveshafts, or at least have the ones that were bolted to the 208 cut shorter

eric
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top