Dodge RamCharger Central banner
1 - 7 of 7 Posts

·
Registered
Joined
·
82 Posts
Discussion Starter · #1 ·
I am getting ready to swap out my 208 for a 241. This is in the 84 model RC. The 241 is out of a 90. What are the differences in the cases. Gear Drive VS Chain Drive. Is one any better than the other. Anything i should look out for in the swap.

THanks

bill
 
G

·
I think the 208 is a 2.4 to1 low while the 241 is 2.6 to 1. There is a 4 to 1 low kit available for the 241.
 

·
Registered
Joined
·
5,581 Posts
i thought the 208 was 2.6 to one? and i know the 241 is 2.72 to 1. and yes, there is a 4 to 1 kit for the 241.

Duane
 

·
Premium Member
Joined
·
7,289 Posts
Both of these t-cases are chain driven using planetary reduction gears and light weight aluminum housings. The 208 came first and has limited shift on the fly capability. You can say that the 241 is an evolution of the 208 in terms of shift on the fly as it has greater capability in this.

Both t-cases have a 1:1 gear reduction in high range, but in low range, the 208 has a 2.61 reduction, while the 241 has 2.72 gear reduction.

Ed
 

·
Premium Member
Joined
·
26,070 Posts
They look very similar too
 

·
Registered
Joined
·
82 Posts
Discussion Starter · #7 ·
Anything I should look for in this swap, or are we a direct bolt in?
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top