Looking for 1980 passenger door, dashcap (dash over the instrument cluster) factory roll bar and 2 roof kits. I live near San Antonio, Texas.
Thanks,
Douglas
Thanks,
Douglas
1980 parts wanted
1 - 13 of 13 Posts
I want to take the top off. The seal is rotted and it will be great to be topless for the 10 months of summer we get in Texas. There is a factory kit for covering the parts exposed when the roof comes off.
Joined
·
3,240 Posts
Never heard of that factory kit.
Yes, 10 months of Summer followed by 7 months of Winter, often both on the same day or week lol
Bucky
'79 Macho 360 Magnum, Comp 480 cam, Hughes springs, 650 Thunder AVS, Pertronix Flamethrower ignition
Joined
·
8,451 Posts
I need to do a Texas road trip also. I remember and loved how rough and tough Texans used to be. Like a texas Ranger 👍
this kit
Joined
·
31,939 Posts
That kit had a page showing where all the bolts are, and 4 little round rubber pieces about 1/4" diameter, and 1 to 2 inches long, to install in the weatherstriping that goes around the door, to align the weatherstriping back together after you reinstall the top. That striping that goes around the door, needs to be cut at the body/ top junction, and the top/ windshield junction the first time the top is removed, The pieces are inserted inside the hollow part of the seal to keep it alingned when the top is back on. Look at the seal on yours to see if it was ever cut at those locations, can tell you if the top was ever off or not.
Joined
·
31,939 Posts
I know, an old thread. I just located a pic of the kit.
![Pink Font Material property Magenta Rectangle]()
Joined
·
3,240 Posts
You should scan the text and post it. It would be interesting to see
Joined
·
31,939 Posts
I just found the picture on the web, I wish I could find a scan of the page.
Cool to get a photo!
Thanks
Thanks
1 - 13 of 13 Posts
