Dodge Ram Cummins Diesels and Mopar banner

1 - 8 of 8 Posts

·
Registered
Joined
·
42 Posts
Discussion Starter · #1 ·
am I correct on the 1980 4wd D150 BOLT PATTERN BEING 5 ON 5.5 INCHES ? with a hub opening of 4.25 inches ?

info I have read says lug pattern is 5 on 4.5 but mine are not that.

also Hub opening is 4.25 inches

want to order 15x8 "D" Hole black rims, making sure what I need.

anyone want to confirm?

thanx
dave in NC:)
 

·
Registered
Joined
·
1,137 Posts
80 4wd is 5x5.5, 2wd is 5x4.5 with a 2.8 inch register.

I've not measured the register on the 4wd but most aftermarket wheels are way oversized for them.
 

·
Registered
Joined
·
42 Posts
Discussion Starter · #3 ·
THANX RUDERUNNER

LIKE YOUR USER NAME !

dave in NC:)
 

·
Super Moderator
Joined
·
59,449 Posts
You could be getting bad info, because a D150, is a 2wd truck. A W150, is a 4x4. Unless someone converted yours, you have a W150.
 

·
Registered
Joined
·
2,057 Posts
FWIW with regard to the dodge 5x5.5" pattern...

Ford uses a slightly smaller hub bore than 93-older Dodge. And 94+ dodge is an even smaller bore than Ford. So watch for that - easy to forget with your spare!

And aftermarket wheels typically use a completely oversized hub bore so they fit all makes (Ford, Dodge, IH, Jeep, Suzuki, etc)
 

·
Registered
Joined
·
28,128 Posts
a 1980 should be a full-time 4x4 and it has the 5 x 4 1/2 pattern [ whats you front hub look like ]
 
1 - 8 of 8 Posts
Top